Nahlásit • Board Game Arena

Všechna hlášení

Hlášení Terra Mystica

#102169: "Architechts cannot move a bridge from a town even though the remaining town would be large enough"

fixed: Chyba byla odstraněna

Čeho se toto hlášení týká?

Terra Mystica #431256959

Co se stalo? Prosím vyberte níže

Rozhraní mně nepovolilo provést akci, která je podle pravidel možná

Co se stalo? Prosím vyberte níže

Rozhraní mně nepovolilo provést akci, která je podle pravidel možná

Prosím zkontroluj, zda již neexistuje hlášení pro stejnou věc

Pokud ano, HLASUJ pro toto hlášení. Hlášení s nejvyšším počtem hlasů budou řešena PŘEDNOSTNĚ!

#	Status	Votes	Game	Type	Title	Last update

Detailní popis

Historie hlášení

24. Oct 2023 18:13 • Xevoc • Chyba zatím nebyla vývojáři reprodukována:

I had town with SA, bridge, D, TP, another bridge and behind that bridge D and TP. The part with SA, bridge, D and TP is large enough for a town so I should have been able to move the other bridge using SH action, but game didn't allow me to do it. I think the check for being able to support the town doesn't take other bridges appropriately into account.

2. Nov 2023 18:21 • Exline • Chyba zatím nebyla vývojáři reprodukována:

boardgamearena.com/9/terramystica?table=430263395

Experiencing a similar issue here in this live game.

I have a town with SH, 2 bridges, and 4 dwellings. Town marker is on d6. Also have a town in the center stretch with SA, 3 dwellings, and a bridge.

Attempting to move the bridge from d6-c5 down to d6-e8. My understanding - and I believe this has worked in the past - is that this should be legal because the bridge moving ability should check for town legality upon resolution of the bridge move. The d6 space with the town marker would be in a legal town grouping post bridge move (as it would now be bridged to the existing center town).

The game gives me the same error as Xevoc.

6. Nov 2023 18:40 • Exline • Chyba zatím nebyla vývojáři reprodukována:

update: I thought my above issue was related to Xevoc's with not counting bridges as part of a town or something, but now I believe it is actually the mis-reporting of this linked issue as a bug which has caused the architects to lose functionality:

boardgamearena.com/bug?id=98107

Based on the verbiage as written on the SH, this is not a bug.

25. Nov 2023 20:41 • Moonsteel • Chyba zatím nebyla vývojáři reprodukována:

boardgamearena.com/6/terramystica?table=439387022

Same error according to r1234

Its at the end

E3:tp - D3:sh - D3/C2:bridge - C2:d - C2/D4:Bridge - D4:d - E6:tp - F3:te - G2:sa - F3/G1:bridge - G1:d

the F3/G1:bridge should be movable since with it moved the town has enough power and buildings left to even satisfy 2 towns.

25. Nov 2023 20:46 • Moonsteel • Chyba zatím nebyla vývojáři reprodukována:

Clarification, town tile location:
E3:tp - D3:sh - D3/C2:bridge - C2:d<TW6> - C2/D4:Bridge - D4:d - E6:tp - F3:te - G2:sa<TW1> - F3/G1:bridge - G1:d

<TW6> - 2cult 2key 2vp
<TW1> - 6c 5vp

25. Nov 2023 22:55 • _Yotsuba_ • Chyba zatím nebyla vývojáři reprodukována:

I'm guessing that in Terra Mystica #431256959 there is some sort of issue with two town tiles being in the same big town. I'm thinking the game wants that to be two sepearate towns to allow a bridge move. If that is the case, I dont think the wording of the rules support that.

26. Nov 2023 18:54 • r1234 • Chyba zatím nebyla vývojáři reprodukována:

Table #439387022
Move #308
Progression 84%

Same issue. The rules clearly should allow me to move the lowest of my three red bridges somewhere -- but that bridge (and the upper left red bridge, by my reading the rules) produce an error: "This Bridge can not be moved as it would break an existing Town".

28. Nov 2023 11:28 • Rincevent123 • Chyba byla odstraněna:

Official solution from the game publisher:
When moving a bridge, check if any town marker on either side of the old
or new location of the bridge is affected by it. Each town marker still
needs to be supported by a sufficient number and power value of
buildings (and/or bridges). If the move of the bridge would make 2 (or
more) town markers part of the same town, the town needs to have a
sufficient number and power value of buildings to support ALL town
markers. So for example, joining 2 town markers means you need 8
buildings with a power value of 14 (or 7 buildings of the Sanctuary is
part of the town).

I updated the BGA implementation accordingly

Doplňte tuto zprávu

Prosím přidej sem cokoli, co by mohlo být relevantní pro reprodukci této chyby nebo pochopení tvého návrhu:

ID dalšího stolu / ID tahu
Byla chyba odstraněna stisknutím F5?
Objevila se tato chyba častěji? Pokaždé? Náhodně?
Pokud máš snímek obrazvky zobrazující tuto chybu (doporučujeme!), můžeš použít Imgur.com pro nahrání obrázku a pak odkaz na tento obrázek na Imguru zkopírovat a vložit sem.

Zrušit Upravit zprávu

#102169: "Architechts cannot move a bridge from a town even though the remaining town would be large enough"

Čeho se toto hlášení týká?

Co se stalo? Prosím vyberte níže

Co se stalo? Prosím vyberte níže

Prosím zkontroluj, zda již neexistuje hlášení pro stejnou věc

Detailní popis

Historie hlášení

Doplňte tuto zprávu

Změnit status hlášení na:

Nápověda

Přispět

Navigovat

Sleduj nás