• Prosím, zkopíruj a vlož hlášení o chybě, které vidíš na monitoru, pokud to lze.

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Prosím popiš, co jsi měl v úmyslu udělat, co jsi udělal a co se nakonec stalo

• Jaký prohlížeč používáte?

• Prosíme, zkopíruj/vlož text zobrazený v angličtině namísto tvého jazyka. Pokud máš snímek obrazvky zobrazující tuto chybu (doporučujeme!), můžeš použít Imgur.com pro nahrání obrázku a pak odkaz na tento obrázek na Imguru zkopírovat a vložit sem.

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Je tento text k dispozici v systému pro překládání? Pokud ano, byl přeložen před více než 24 hodinami?

• Jaký prohlížeč používáte?

• Prosím popiš svůj návrh přesně a konzistentně, aby bylo snadné pochopit, co máš na mysli.

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Jaký prohlížeč používáte?

• Co bylo zobrazeno na monitoru, když došlo k tvému zablokování? (Černá obrazovka? Část herního prostředí? Hlášení o chybě?)

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Jaký prohlížeč používáte?

• Která část pravidel nebyla dodržena adaptací hry na BGA

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Je vidět porušení pravidel na záznamu hry? Pokud ano, ve kterém tahu?

• Jaký prohlížeč používáte?

• O jakou herní akci ses pokoušel/a?

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Co ses pokoušel/a udělat, abys spustil/a tuhle herní akci?

• Co se stalo, když ses o tuto akci pokusil/a (vyskočila chybová hláška, lišta ve hře, ...)?

• Jaký prohlížeč používáte?

• V jaké fázi hry problém nastal (jaký byl poslední herní pokyn)?

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Co se stalo, když ses pokusil/a udělat akci (chybová hláška, oznámení stavového řádku hry, ...)?

• Jaký prohlížeč používáte?

• Prosím popište vyobrazený problém. Pokud máš snímek obrazvky zobrazující tuto chybu (doporučujeme!), můžeš použít Imgur.com pro nahrání obrázku a pak odkaz na tento obrázek na Imguru zkopírovat a vložit sem.

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Jaký prohlížeč používáte?

• Prosíme, zkopíruj/vlož text zobrazený v angličtině namísto tvého jazyka. Pokud máš snímek obrazvky zobrazující tuto chybu (doporučujeme!), můžeš použít Imgur.com pro nahrání obrázku a pak odkaz na tento obrázek na Imguru zkopírovat a vložit sem.

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Je tento text k dispozici v systému pro překládání? Pokud ano, byl přeložen před více než 24 hodinami?

• Jaký prohlížeč používáte?

• Prosím popiš svůj návrh přesně a konzistentně, aby bylo snadné pochopit, co máš na mysli.

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Jaký prohlížeč používáte?